iHome 1H050020WFB(F)6L Setup Guide

Quick answer

To pair and set up your iHome 1H050020WFB(F)6L accessory, connect the included AC power adapter to a 100-240V outlet, plug the 2.5mm straight I-plug jack into your device, and follow the pairing sequence in the user manual.

Step-by-Step Setup Instructions

1. Unbox and Inspect: Remove the 1H050020WFB(F)6L from its packaging. Verify you have the AC power adapter (5V, 2.0A, 2.5mm straight I-plug) and the main accessory. Check for any visible damage before proceeding. Do not use if the adapter or accessory shows signs of damage.
2. Connect the Power Adapter: Plug the 2.5mm straight I-plug end of the adapter into the accessory's power port. Then, connect the adapter to a wall outlet. The accessory should power on automatically—look for an LED indicator or power light. If the accessory does not power on, try a different outlet and ensure the plug is fully inserted.
3. Pair with Your Device: Place the accessory near your iHome device (within 3 feet for initial pairing). Follow your device's pairing instructions—typically, press and hold the pairing button on both the device and the accessory until they sync. A successful pairing is confirmed by a steady light or audible tone. If pairing fails, move the devices closer and ensure no other wireless devices are interfering.
4. Test the Connection: Once paired, test the accessory by performing a basic function (e.g., adjusting volume, playing audio, or triggering a sensor). Ensure the accessory responds correctly to your device's commands. If the accessory does not respond, repeat the pairing process or consult the user manual for device-specific steps.
5. Finalize Placement and Use: Position the accessory in its intended location, ensuring the power cable is not strained. For best performance, avoid placing it near large metal objects or other electronics that may cause interference. Regularly check the connection and power adapter for wear to maintain reliable operation.

Product Facts

• 1H050020WFB(F)6L: AC Power Adapter Input Voltage - 100-240v -50/60hz Voltage - 5V Amps - 2.0A Jack Diameter - 2.5mm Jack Shape - Straight (I-plug) Color - Black The 2.5mm straight I-plug ensures a secure connection to compatible iHome devices, and the 100-240V input means you can use it worldwide without a voltage converter.