How to Install and Use the 9IH563B Power Adapter

By iHome | Premium Audio Products & Innovative Sound Solutions | Published: 2026-10-24

Category: How-to Guides

Learn how to safely install and use the iHome 9IH563B AC power adapter. Step-by-step guide with common mistakes to avoid for your audio device.

Quick answer

The iHome 9IH563B AC power adapter is a direct replacement for your compatible iHome device. Install it by matching the voltage and plug shape, then connect securely to avoid power interruptions.

Why the 9IH563B is the right adapter for your iHome device

The 9IH563B is a dedicated AC power adapter designed for select iHome audio products. Its elbow (L-plug) jack allows for a low-profile connection that fits snugly against the device, reducing strain on the port and cable. This design is especially helpful when space behind your device is limited.

What to check before you plug it in

Before connecting, verify that your iHome device requires a 7.5V, 2.3A power input with a 5.5mm barrel jack. The 9IH563B operates on 100-240V AC, 50/60Hz, so it works worldwide with the correct physical plug adapter. Using an adapter with different voltage or amperage ratings can damage your device.

Step-by-step installation and usage guide

Step 1: Inspect the adapter and your device: Check that the 9IH563B’s output is 7.5V, 2.3A and that your iHome device’s power input matches these specs. Confirm the 5.5mm barrel jack fits your device’s port. Common mistake: using an adapter with mismatched voltage or amperage can permanently damage your device.
Step 2: Connect the L-plug to your device: Align the elbow-shaped plug with the power input on your iHome device. Insert it straight in until it clicks or seats fully. The L-shape should point downward or to the side, depending on your device orientation. Do not force the plug at an angle – it should slide in smoothly. Forcing it can bend the jack pins.
Step 3: Plug the adapter into a wall outlet: Insert the two-prong AC end into a standard wall outlet (100-240V). Ensure the connection is firm and the outlet is easily accessible in case you need to unplug the adapter quickly. Avoid using extension cords or power strips that may not supply stable voltage. Plug directly into a wall outlet when possible.
Step 4: Power on and test your device: Turn on your iHome audio device. If it does not power on, check that the adapter is fully inserted at both ends and that the outlet is live. A small LED on the adapter (if present) may indicate power flow. If the device still doesn’t power on, try a different wall outlet. If that fails, the adapter may be defective – contact iHome support.
Step 5: Secure the cable to prevent strain: Route the adapter cable so it is not pinched, stretched, or bent sharply near the plug. Use cable clips if needed to keep the cord tidy and reduce wear over time. Pulling the cable by the cord (instead of the plug) when disconnecting can loosen the internal wires. Always grip the plug body.

Product facts

9IH563B: AC Power Adapter Input Voltage - 100-240v -50/60hz Voltage - 7.5V Amps - 2.3A Jack Diameter - 5.5MM Jack Shape - Elbow (L-plug) Color - Black The L-plug shape allows the adapter to sit flush against the device, preventing accidental disconnection and saving space behind your audio equipment.
9IH563B