Start with the mirror, then add sound
The iHome GLOW RING XL (iCVBT12) combines a lighted vanity mirror, a Bluetooth speaker, a phone mount, and a removable 10x magnifying mirror in one unit. Setting it up in the right order—light first, then Bluetooth, then accessories—keeps you from juggling too many adjustments at once.
Before you begin, place the mirror on a stable surface near an outlet. The mirror is cordless and rechargeable, and a charger is included, so you can move it later once it is charged.
Lighting setup: 3 color modes, 4 brightness levels
The GLOW RING XL gives you three color modes—Warm, Bright, and Cool—and four dimmable brightness levels (Max, High, Mid, and Lo). Use the controls to cycle through them until the light suits your space and task.
- Choose a color mode: Warm, Bright, and Cool change the character of the light. Try each one in your usual getting-ready spot to see which feels most natural for your skin and surroundings.
- Set brightness: Four levels let you go from a soft glow to maximum output. Start at a middle level and adjust up or down rather than jumping straight to Max.
- Tilt the mirror: The mirror tilts to any angle, so set the tilt after you have chosen your light settings. That way you are judging brightness from the position you will actually use.
Makeup mirror lighting tips
High-quality LEDs are meant to provide clear, true color, but the light in your room still matters. If your room has strong overhead light or a window nearby, check how the mirror's light reads alongside it rather than in isolation.
For close work, use a brighter setting and the Cool or Bright mode; for a softer everyday look, try Warm at a lower level. There is no single correct setting—the goal is consistency, so you see your makeup under the same conditions each time.
Pair your phone to the mirror's Bluetooth speaker
The built-in Bluetooth speaker lets you stream music, podcasts, and more while you get ready. The same speaker also supports hands-free speakerphone calls and voice commands via Siri and Google Assistant.
- Power on the mirror: Make sure the mirror is charged or plugged in. The speaker is built into the unit, so the mirror needs power to stream audio.
- Enable Bluetooth on your phone: Open your phone's Bluetooth settings and turn it on. Keep the phone within a few feet of the mirror during pairing.
- Select the mirror from your device list: Look for the iCVBT12 or the iHome entry in your phone's Bluetooth menu and tap to connect. The exact name shown depends on your phone's display.
- Test playback and calls: Play a song or podcast to confirm the connection, then try a speakerphone call to check that the microphone and speaker work as expected.
What the iCVBT12 includes
- Vanity Mirror with Lights and Bluetooth Speaker, Magnifying Mirror, and Phone Mount (iCVBT12): 13” round distortion-free mirror with 3 color modes (Warm, Bright, Cool) and 4 dimmable brightness levels. These are the core lighting controls you will adjust during setup.

Vanity Mirror with Lights and Bluetooth Speaker, Magnifying Mirror, and Phone Mount (iCVBT12) - Vanity Mirror with Lights and Bluetooth Speaker, Magnifying Mirror, and Phone Mount (iCVBT12): Built-in Bluetooth speaker with hands-free speakerphone and voice control for Siri and Google Assistant. Explains what you can stream and how you can take calls without reaching for your phone.
- Vanity Mirror with Lights and Bluetooth Speaker, Magnifying Mirror, and Phone Mount (iCVBT12): Removable 10x magnifying mirror and removable phone mount included. Both accessories are part of the setup and can be positioned or removed as needed.
- Vanity Mirror with Lights and Bluetooth Speaker, Magnifying Mirror, and Phone Mount (iCVBT12): USB charging port on the back of the unit for charging your phone. Lets you keep your phone charged while it is mounted and connected.
Mount your phone for tutorials and calls
The removable phone mount is designed for watching or recording makeup tutorials. Position it where the screen is visible without blocking the mirror surface.
- Attach the mount: Seat the removable phone mount on the mirror as intended. Because it is removable, you can take it off when you want an unobstructed view.
- Angle the phone: Adjust the phone so the camera or screen faces you. The mirror tilts independently, so set both angles before you start recording.
- Connect charging: If you are recording or on a long call, plug your phone into the USB charging port on the back of the unit to avoid running down the battery.
Use the 10x magnifying mirror
The removable 10x magnifying mirror is a separate piece that attaches to the main mirror. Use it for close-up work such as brows or detailed eye makeup.
- Attach or remove as needed: Place the magnifying mirror on the main mirror when you need magnification, and remove it for a full-face view.
- Position for comfort: Tilt the main mirror first, then adjust your position so the magnified area is at eye level. The 10x magnification is strong, so small movements are amplified.
- Clean with the included cloth: A microfiber cleaning cloth is included. Use it to keep both mirror surfaces clear of smudges.
Charging and portability
The mirror is cordless and rechargeable, and a charger is included. Charge it fully before moving it away from an outlet. The USB port on the back is for charging your phone, not for charging the mirror itself.
Because the mirror is portable, you can move it between rooms or take it with you. Just remember that Bluetooth range and speaker volume will depend on your phone and surroundings.


