Back to Blog
How-to Guides 2026-11-21 iHome | Premium Audio Products & Innovative Sound Solutions 0 views

Bluetooth Speaker with Wireless Charger: Fix Connection Issues

Bluetooth Speaker with Wireless Charger: Fix Connection Issues

Troubleshoot common Bluetooth speaker and wireless charger problems with the iHome Power Tower (iPBT50G). Get step-by-step advice for pairing, charging, and setup.

Why Your Bluetooth Speaker or Wireless Charger May Not Work

When a device like the iHome Power Tower (iPBT50G) combines a Bluetooth speaker, dual wireless chargers, and a color-changing night light, a single hiccup can affect multiple features. Connection drops, slow charging, or no sound often stem from a few common causes. This guide helps you diagnose and fix them without guesswork.

iHome Power Tower (iPBT50G) Key Specs at a Glance

Step-by-Step Troubleshooting for Bluetooth Connection Issues

Follow these steps in order to resolve pairing or audio dropouts.

  1. Check the power source: The iHome Power Tower requires a 20W PD adapter. Plugging it into a standard USB-A port or a low-wattage charger may prevent Bluetooth from initializing properly.
  2. Enable pairing mode on the speaker: Press and hold the Bluetooth button until the indicator light flashes. Make sure your phone or tablet is within 100 feet (the supplied wireless range) and has Bluetooth turned on.
  3. Remove old pairings: If the speaker was previously paired with another device, go to your phone's Bluetooth settings, forget the iHome device, and restart the pairing process.
  4. Reset the speaker: Turn the Power Tower off, wait, then turn it back on. This clears temporary glitches without losing saved pairings.
  5. Check for interference: Move the speaker away from other electronics, metal objects, or thick walls that can block the Bluetooth signal.

Fixing Wireless Charger Not Working

If your phone or AirPods aren't charging on the Power Tower, try these steps.

  1. Verify the adapter and cable: Use the supplied 20W PD adapter and a quality USB-C cable. A weak adapter or damaged cable can stop wireless charging entirely.
  2. Align the device correctly: The 15W flip-up pad is MagSafe compatible for iPhones; for other phones, center the device over the charging coil. The 5W pad works best with AirPods cases placed flat in the center.
  3. Remove thick cases or metal accessories: Cases thicker than the recommended limit or those with magnets, credit cards, or metal can block the charging field. Remove them before placing the device on the pad.
  4. Check the charging pad surface: Dust or debris on the pad can prevent a good connection. Wipe both the pad and the device back with a soft, dry cloth.
  5. Test with another device: If one device doesn't charge, try a different compatible phone or AirPods case. This tells you whether the issue is with the charger or the device.

What to Do If the Night Light Affects Charging or Audio

The three LED color-changing modes operate independently of the Bluetooth and charging circuits, so they shouldn't interfere. However, if you notice the speaker volume drops or the charger stops when you change the light mode, try turning the night light off to see if the issue resolves. If it does, the problem is likely a power draw from an underpowered adapter—ensure you're using the 20W PD adapter.

When to Check the User Manual

The supplied information for the iHome Power Tower does not include detailed operating instructions or specific troubleshooting steps for every scenario. If the steps above don't solve your problem, refer to the product's user manual for pairing sequences, reset procedures, and safety guidelines. The manual is the most reliable source for model-specific details.

Related Articles

Customer Service
Home
Products
Cart
Profile